Custom Stripmaster

Custom Stripmaster^® & Custom Stripmaster^® Lite Wire Strippers

Stripmaster Selection Guide
Strips #10 AWG to #30 AWG solid or stranded wire Die-type blades allow precision stripping Counterbored hole size precisely centres wire to prevent unwanted conductor contact MIL-spec blades dispense unwanted insulation Optional short stop latch and transparent wire stop Custom Stripmaster® Lite is three-quarters the size of Custom Stripmaster® Wire Stripper Custom Stripmaster® Lite requires one-third less hand pressure for each strip Cushioned, non-slip comfort-grip handles Engineering Service and made-to-order blades available.

Custom Stripmaster® Wire Stripper Blades

Wire Size/Stripping Hole Diameter
Catalogue Number	Blade only	10	12	14	16	18	20	22	24	26	28	30
For Type E TEFLON® (600V)
		Cutting Hole Diameter Counterbore Diameter (Inches)
45-176	L-5559	.119 .136	.096 .113	.076 .0935
45-177	L-5560				.061 .081	.052 .070	.042 .0595	.034 .052	.028 .043	.023 .039
45-178	L-5561									.023 .039	.019 .035	.016 .032

For Type EE TEFLON® (1000V)
Catalogue Number	Blade only	Cutting Hole Diameter Counterbore Diameter (Inches)
45-173	L-5562	.119 .144	.096 .125	.076 .104
45-174	L-5563				.061 .089	.052 .0785	.042 .067	.034 .0595	.028 .055	.023 .0465
45-175	L-5564									.023 .0465	.019 .043	.016 .042

For PVC & Other Misc. Insulations
Catalogue Number	Blade only	Cutting Hole Diameter Counterbore Diameter (Inches)
45-170	L-5210	.116 .154	.0937 .138	.076 .113
45-171	L-5211				.062 .096	.052 .086	.042 .073	.035 .0635	.0292 .0595	.022 .052
45-172	L-5436									.024 .043	.020 .040	.016 .037

Tolerances: Cutter diameter + .001;Counterbore diameter + .002
The 45-170 series is a Custom Stripmaster^® Wire stripper frame
without the short stop latch and wire stop.
The 45-180 series is a Custom Stripmaster^® Wire stripper frame
with the short stop latch and wire stop.
45-169 through 45-188 include grit-type pads (standard).
45-369 through 45-388 include file-type pads.
45-469 through 45-488 include parallel-type pads.


Custom Stripmaster® Lite Wire Stripper and Die-Type Blades

Wire Size/Stripping Hole Diameter
Catalog Number	Blade only				16	18	20	22	24	26	28	30
MIL-W-16878 Type E 600V TEFLON® Wire
		Cutting Hole Diameter Counterbore Diameter (mm)
45-638	LB-918				.061 .081	.052 .070	.042 .0595	.034 .052
45-639	LB-919						.042 .0595	.034 .052	.028 .043	.023 .039
45-640	LB-920								.028 .043	.023 .039	.019 .035	.016 .032

MIL-W-16878 Type EE 1000V TEFLON® Wire
		Cutting Hole Diameter Counterbore Diameter (mm)
45-635	LB-915				.061 .089	.052 .0785	.042 .067	.034 .0595
45-636	LB-916						.042 .067	.034 .0595	.028 .055	.023 .0465
45-637	LB-917								.028 .055	.023 .0465	.019 .043	.016 .042

General Purpose PVC
		Cutting Hole Diameter Counterbore Diameter (mm)
45-632	LB-912				.062 .089	.052 .086	.042 .073	.035 .0635
45-633	LB-913						.042 .073	.035 .0635	.0292 .0595	.022 .052
45-634	LB-914									.0292 .0595	.024 .043	.016 .037

For Wire Wrap & Other Thin Insulated Wire
		Cutting Hole Diameter Counterbore Diameter (mm)
45-641	LB-921	Four Holes, same size										.012 .020
45-631	LB-911	Solid Wire							.024 .033	.018 .025	.014 .023	.012 .019

Tolerances: Cutter diameter. + .001; Counterbore diameter: + .002

TEFLON® is a registered trademark of E.I. du Pont de Nemours and Company

Back