Battery Tools for Military & Aerospace

Battery Tools

Get the Portability of a Hand Tool with the Stamina of a Power Tool

Crimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service.

Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems.

These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high.

DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you.

So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered tool might be what you need.

GMTExxxB

GMT Series battery powered hydraulic tools to crimp open barrel (stamped and formed) contacts, insulated and non-insulated terminals, splices, and end caps, coaxial connectors, and wire fittings of all types are covered by these tools. Just like with the hand tools, locators are included for applications where they are needed to hold contacts in the correct location for optimum crimping.

 

 

HXE4B

The HXE4B Battery Powered Hydraulic Open Frame Crimp Tool is a hand held, self-contained crimp tool. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weighs about 4 pounds. It is comparable to DMC’s HX4 hand tool and uses the same Y-dies.

 

 

 

 

DCTE4B

The DCTE4B Battery Powered Crimp Tool is a hand held, self-contained crimp tool intended to crimp copper and aluminum cable with DMC “DCT4” Dies. (NOTE: Dies are sold separately). Dies are also available for D-Sub connectors, Red/Blue/Yellow “Heat-N-Seal” terminals, “MiniSeal” terminals and many more terminal types.

 

 

AFE8

The AFE8B Battery Powered Hydraulic Indent Crimp Tool is a hand held, self-contained indent crimp tool. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weighs about 4 pounds. It is comparable to DMC’s AF8 hand tool and uses the same turret heads, positioners, and other accessories.

 

SCTExxxB

The SCTE62XX Battery Powered Safe-T-Cable Crimp Tool is a hand held, self-contained crimp tool intended to crimp ferrules, and tension/cut the cable in SCTE625 Battery Powered Safe-T-Cable Crimp Tool in accordance with the performance requirements of SAE specification AS4536. The application tool installs Safe-T-Cable kits indentified in SAE specifications AS3509, AS3510 and AS3511.

 

 

 

HDE36B

The HDE36B Battery Powered Crimp Tool is a hand held, self-contained, 4 ton hydraulic crimp tool that is actuated with a single squeeze of the trigger.
This tool is designed to accept the entire family of HD36 dies for crimping terminals, lugs or any other special applications. WIRE RANGE: #8 to #0 AWG in many power applications, and .750 (19.05mm) in coaxial hexagonal crimping.

 

 

To see our full range of Battery Tools, please click on the following link