FIBRE-AVIATION

Aviation Fibre Optic Kits

Aviation Fiber Optic Inspection & Cleaning Kit
PART#: 0741-8010

The Aviation Fiber Optic Inspection and Cleaning Kit was designed with input from the Commercial Air Transport Industry.  This kit is designed to inspect and clean the most common types of fiber optic connectors found onboard the aircraft.

This kit will allow the technician to inspect and clean the following fiber optic connectors/termini:

* M38999 Plug Connectors
* ARINC 801 Circular Connectors
* ARINC 600 Rectangular Connectors
* EPX Rectangular Connectors
* Quadrax Size 8 Connectors
* ARINC 801 Termini
* EN 4531 Termini
* M29504/04 Pin Termini
* M295-4/05 Socket Termini
* ST Connectors
* SC Connectors
* FC Connectors
* LC Connectors

Aviation Fiber Optic Inspection & Cleaning Kit
PART#: 0741-8015

This kit is designed to test the fiber optic endface using a laptop computer and software that will give the technician a Pass or Fail inspection result.  The software also allows the technician to capture a picture of the endface and save the test results.  The kit will also clean the most common types of fiber optic connectors found onboard the aircraft.

This kit will allow the technician to inspect and clean the following fiber optic connectors/termini:

* M38999 Plug Connectors
* ARINC 801 Circular Connectors
* ARINC 600 Rectangular Connectors
* EPX Rectangular Connectors
* Quadrex Size 8 Connectors
* ARINC 801 Termini
* EN 4531 Termini
* M29504/04 Pin Termini
* M29504/05 Socket Termini
* ST Connectors
* SC Connectors
* FC Connectors
* LC Connectors

Aviation Termination Kit with Programmable Oven
PART#: 0741-8001

The 0741-8000 Aviation Termination Kit is designed to terminate and/or repair M29504/4 and M29504/5 termini for circular M38999 connectors.

This kit will also terminate the ARINC 801 termini, Elio (EN4531) termini, the M83522/16 ST connectors as well as the approved Commercial Off the Shelf (COTS) ST, SC connectors, and LC connectors. This kit contains all of the tooling and consumables required to completely terminate all of the termini and connectors listed above for installation of fiber optics in harsh environments onboard the aircraft. The kit also contains the programmable curing oven that allows for a 4 step temperature cure schedule.

The kit meets and exceeds all of the current military Aviation Termination Kit requirements, and the rugged hard shell
case meets the MIL–STD–810F requirements.

Commercial Aviation Fiber Optic Termination Kit
PART#: 0741-8000

The 0741-8000 Aviation Termination Kit is designed to terminate and/or repair M29504/4 and M29504/5 termini for circular M38999 connectors.

This kit will also terminate the ARINC 801 termini, Elio (EN4531) termini, the M83522/16 ST connectors as well as the approved Commercial Off the Shelof (COTS) ST and SC connectors, and LC connectors.  This kit contains all of the tooling and consumables required to completely terminate all of the termini and connectors listed above for installation of fiber optics in harsh environments onboard the aircraft.  

The kit meets and exceeds all of the current military Aviation Termination Kit requirements, and the rugged hard shell case meets the MIL-STD-810F requirements.

Elio Fiber Optic Inspection and Cleaning Kit
PART#: 0741-8011

The Elio FIber Optic Inspection and Cleaning Kit was designed to inspect and clean the Souriau Elio Termini (EN 4531) that are installed in either circular (m38999) style connectors or rectangular (ARINC 600) aerospace connectors.

This kit contains the following items:
* Video Inspection Display
* Fiber Optic Viceo Probe
* Universal 2.50mm Video Probe Tip
* Visual Fault Locator (VFL)
* Fiber Optic Cleaning Fluid
* Fiber Optic Cleaning Wipes
* Elio 2.50mm Plug Side Fiber Optic Cleaning Sticks
* Elio 2.50mm Receptacle Side Fiber Optic Cleaning Sticks
* Elio 2.50mm Cleaning Tool
* Insertion/Extraction Tools for the Elio Terminus

Elio Fiber Optic Termination Kit
PART#: 0741-8005

The Elio Fiber Optic Termination Kit was designed with input from the Commercial Air Transport Industry.  This kit is designed to terminate the Souriau Elio Terminus (EN 4531) for installation into circular and rectangular aerospace connectors.

This kit contains the following items:

230 VAC Epoxy Curing Oven, 8 Port, CE Approved
EPO-TEK 353ND Epoxy
All required polishing films
2.50mm Carbide Tungsten Polishing Puck
200X hand held microscope
All required termination tooling
Insertion/extraction tools for the Elio terminus.

Comments are closed, but trackbacks and pingbacks are open.