DMC makes a range of Circular Indent Crimp Tools used primarily for outer shield terminations in contacts. These tools are capable of crimping a circle as small as 0.040″ and as large as 0.262″.
Due to the nature of crimping a complete circle, with four equal segments each tool is specified for a certain diameter. See the charts on this page for diameter sizes and part numbers.
For Mil Spec Circular Indent Crimp Tools click here.
For Dedicated Application Circular Crimp Tool click here.
CIRCULAR CRIMP TOOLS BY CRIMP DIMENSIONS |
||
CIRCULAR CRIMP DIMENSION |
TOOL P/N |
GAGE |
| 0.042-0.046″ | GS210 | G925 |
| 0.061-0.065″ | GS205 | G450 |
| 0.065-0.099″ | GS8-3 | G941 |
| 0.080-0.084″ | GS212 | G732 |
| 0.086-0.090″ | GS225 | G919 |
| 0.093-0.097″ | GS221 | G881 |
| 0.096-0.100″ | GS222 | G120 |
| 0.124-0.128″ | GS223 | G917 |
| 0.140-0.144″ | GS226 | G1056 |
| 0.142-0.146″ | GS218 | G443 |
| 0.154-0.158″ | GS200-1 | G446 |
| 0.156-0.160″ | GS100-1 | G445 |
| 0.167-0.171″ | GS227 | G1057 |
| 0.190-0.194″ | GS219 | G848 |
| 0.197-0.201″ | GS208 | G533 |
| 0.234-0.238″ | GS213 | G926 |
| 0.258-0.262″ | GS206 | G426 |
CIRCULAR CRIMP TOOLS BY PART NUMBER |
||
TOOL P/N |
CIRCULAR CRIMP DIMENSION |
GAGE |
| GS100-1 | 0.156-0.160″ | G445 |
| GS200-1 | 0.154-0.158″ | G446 |
| GS205 | 0.061-0.065″ | G450 |
| GS206 | 0.258-0.262″ | G426 |
| GS208 | 0.197-0.201″ | G533 |
| GS210 | 0.042-0.046″ | G925 |
| GS212 | 0.080-0.084″ | G732 |
| GS213 | 0.234-0.238″ | G926 |
| GS218 | 0.142-0.146″ | G443 |
| GS219 | 0.190-0.194″ | G848 |
| GS221 | 0.093-0.097″ | G881 |
| GS222 | 0.096-0.100″ | G120 |
| GS223 | 0.124-0.128″ | G917 |
| GS225 | 0.086-0.090″ | G919 |
| GS226 | 0.140-0.144″ | G1056 |
| GS227 | 0.167-0.171″ | G1057 |
| GS8-3 | 0.065-0.099″ | G941 |