Coaxial Contact Tool Selection Guide

PRODUCTS
- Backshell ToolingThe evolution of circular connectors has produced a multitude of configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA® system was developed.
- Banding ToolsThe termination of EMI/RFI shielding materials is a specialised science in today’s aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the world’s leading connector accessory manufacturers and standards organisations to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defence system contractors. The resulting products afford the user a repeatable and reliable means of terminating shielding on aerospace wiring systems. Tooling is available for all bands qualified to AS85049/128
- Battery Crimp ToolsCrimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service. Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems. These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered…
- Connectors
- Crimp Tool GaugesWith the need to ensure that your tooling die sets, positioners, turret heads and also the indent crimp tools is in calibration and conforms to the required standards, DMC have a large range of GO NO-GO Gauges available for a variety of applications. If you do not know the required GO NO-GO gauge please contact us for assistance.
- Cutting & Stripping ToolsCable preparation is an essential part of wiring system practices, and have the right tool to prepare our cable for crimping of contacts, terminals or lugs is critical. It is important not to damage the insulation on conductors, cable shielding or damage the copper or fibre that will be transmitting the signal down you cable.
- DMC Tool KitsBuilding a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all serviceable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. Crimp-Tech and DMC has this knowledge and does the technical research for them.
- Hand Crimp ToolsCrimp-Tech Australia offers a range of Military and Commercial Hand Crimp Tools. Here you will find a range of these products, if the particular tool you are looking for is not listed please contact us.
- Harting Tool Kits
- Heat GunsHeat Guns and Hot Air Hand Tools
- Hydraulic Crimp Tools
- Insertion/Removal ToolsDMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in these reference table, we have many more for other connector applications. Please contact us for more details.
- LaceLok®LaceLok® Cable Lacing Fasteners are used as secondary support for cable and wire bundling. Developed to replace cable ties and hand tied lacing tape, LaceLok® provides an ergonomic solution for consistent bundling with unrivaled strength and superior performance.
- Misc Tools
- Pneumatic Crimp Tools
- Safe-T-CableSafe-T-Cable™ is constructed of high tensile strength, stranded cable. It is more flexible than its Safety Wire counterpart, although the working diameters are equivalent. This provides a stronger assembly which has greater strength and lighter weight. The cable ends are electrically fused to form an easy threading end.
- Terminals
- Test EquipmentTest Equipment
- Torque Wrenches
Tooling Guides
Resources
About Us
Contact Us
FAQ
- News
Log In/Register
- My Quote
Search for:

CONNECTOR SERIES	SHIELDED CONTACTS	BIN CODE	CONTACT CAVITY SIZE	INNER CONTACT		SHIELD CRIMP SLEEVE		OUTER CONTACT		INSTALLING TOOL	REMOVAL TOOL
				CRIMPING TOOL	POSITIONER	CRIMPING TOOL	POSITIONER OR DIE (CAVITY)	CRIMPING TOOL	POSITIONER OR DIE (CAVITY)
MIL-C-81511 SERIES 1 & 2	M39029/6- PIN CONTACT	120	16	AFM8	K262-1	HX4	Y200	HX4	Y200	DAK126-16A	DRK125-16A
		121	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK125-12A
								HX3	X123
		122	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK125-12A
								HX3	X123
		123	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK125-12A
						HX3	X123	HX3	X123
		124	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK125-12A
						HX3	X123	HX3	X123
		125	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK125-12A
								HX3	X123
MIL-DTL-26482 SERIES 2 MIL-C-81703 SERIES 3	M39029/7- PIN CONTACT	126	12	AFM8	K269-1	HX4	Y203			DAK83-12B	DRK83-12B
		127	12	AFM8	K269-1	HX4	Y203			DAK83-12B	DRK83-12B
		128	12	AFM8	K269-1	HX4	Y203			DAK83-12B	DRK83-12B
MIL-DTL-26482 SERIES 2 MIL-C-81703 SERIES 3	M39029/8- SOCKET CONTACT	129	12	AFM8	K269-1	HX4	Y203			DAK83-12B	DRK83-12B
		130	12	AFM8	K269-1	HX4	Y203			DAK83-12B	DRK83-12B
		131	12	AFM8	K269-1	HX4	Y203			DAK83-12B	DRK83-12B
MIL-C-81511 SERIES 1	M39029/13- SOCKET CONTACT	152	16	AFM8	K262-1	HX4	Y200	HX4	Y200	DAK126-16A	DRK129-16A
		153	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
								HX3	X123
		154	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
								HX3	X123
		155	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
						HX3	X123	HX3	X123
		156	12	AFM8	K261-1	HX4	Y152	HX4	Y1’52	DAK126-12A	DRK129-12A
						HX3	X123	HX3	X123
		157	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
								HX3	X123
MIL-C-81511 SERIES 2	M39029/14- SOCKET CONTACT	158	16	AFM8	K262-1	HX4	Y200	HX4	Y200	DAK126-16A	DRK129-16A
		159	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
								HX3	X123
		160	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
								HX3	X123
		161	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
						HX3	X123	HX3	X123
		162	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
						HX3	X123	HX3	X123
		163	12	AFM8	K261-1	HX4	Y152	HX4	Y152	DAK126-12A	DRK129-12A
								HX3	X123
MIL-C-81511 SERIES 3 & 4	M39029/19- PIN CONTACT	181	16	AFM8	K373-1	MH802	D16/1-1M	MH801	D16P-1M	MS3160-16	MS3160-16
		182	12	AFM8	K372-1	MH804	D12/1-1M	MH803	D12P-1M	MS3160-12	MS3160-12
		183	12	AFM8	K372-1	MH804	D12/1-1M	MH803	D12P-1M	MS3160-12	MS3160-12
MIL-C-81511 SERIES 3	M39029/20- SOCKET CONTACT	184	16	AFM8	K373-1	MH802	D16/2-1M	MH801	D12LS-1M	MS3160-16	MS3160-16
		185	12	AFM8	K372-1	MH804	D12/2-1M	MH803	D12LS-1M	MS3160-12	MS3160-12
		186	12	AFM8	K372-1	MH804	D12/2-1M	MH803	D12LS-1M	MS3160-12	MS3160-12
MIL-C-81511 SERIES 4	M39029/21- SOCKET CONTACT	187	16	AFM8	K373-1	MH802	D16/2-1M	MH801	D16S-1M	MS3160-16	MS3160-16
		188	12	AFM8	K372-1	MH804	D12/1-1M	MH803	D12S-1M	MS3160-12	MS3160-12
		189	12	AFM8	K372-1	MH804	D12/1-1M	MH803	D12S-1M	MS3160-12	MS3160-12
MIL-DTL-26482 SERIES 1	M39029/25- PIN CONTACT	204	12	AFM8	K496	HX4	Y189
		205	12	AFM8	K496					DAK12B	DRK12B
		206	12	AFM8	K496	HX4	Y189
MIL-DTL-26482 SERIES 1	M39029/26- SOCKET CONTACT	207	12	AFM8	K496	HX4	Y189
		208	12	AFM8	K496					DAK12B	DRK12B
		209	12	AFM8	K496	HX4	Y189
MIL-DTL-38999 SERIES 2	M39029/27- SOCKET CONTACT	210	12	AFM8	K323			GS200-1	G2P330	DAK95-12B	DRK95-12B
		402
		403
		404
		405
		406
		407
		408
MIL-DTL-38999 SERIES 1, 2, 3 & 4	M39029/29- PIN CONTACT	211	12	AFM8	K323			GS200-1	G2P330	DAK95-12B	DRK95-12B
		409
		410
		411
		412
		413
		414
		415
MIL-C-83733	M39029/50- PIN CONTACT	340	12	AFM8	K404			HX4	Y215	DAK83-12B	DRK83-12B
								HX3	X101
MIL-C-83732	M39029/51- SOCKET CONTACT	341	12	AFM8	K404			HX4	Y215	DAK83-12B	DRK83-12B
								HX3	X101
MIL-DTL-26500	M39029/54- PIN CONTACT	342	12	AFM8	K74S			HX4	Y215	DAK12B	DRK12B
								HX3	X101
		343	8	AFM8	K75S-1			HX4	Y215	DAK55-8B	DRK56-8B
								HX3	X105
MIL-DTL-26500	M39029/55- SOCKET CONTACT	344	12	AFM8	K74S			HX4	Y215	DAK12B	DRK12B
								HX3	X101
		345	8	AFM8	K75S-1			HX4	Y215	DAK55-8B	DRK56-8B
								HX3	X125
MIL-DTL-38999 SERIES 1, 3 & 4	M39029/59- SOCKET CONTACT	366	8	AFM8	K406			HX4	Y197	BY HAND	DRK95-8B
								HX3	H102
MIL-DTL-38999 SERIES 1, 3 & 4	M39029/60- PIN CONTACT	367	8	AFM8	k406			HX4	Y197	BY HAND	DRK95-8B
								HX3	X102
MIL-DTL-38999 SERIES 1, 3 & 4	M39029/75- SOCKET CONTACT	416	12	AFM8	K323			GS200-1	G2P330	DAK95-12B	DRK95-12B
		417
		418
		419
		420
		421
		422
		423
MIL-DTL-38999 SERIES 1, 2, 3 & 4	M39029/76- PIN CONTACT	424	16	AFM8	K532-1			GS100-1	GP295	DAK95-16B	DRK95-16B
		425
		426
		427
MIL-DTL-38999 SERIES 1, 3 & 4	M39029/77- SOCKET CONTACT	428	16	AFM8	K532-1			GS100-1	GP295	DAK95-16B	DRK95-16B
		429
		430
		431
MIL-DTL-38999 SERIES 2 MIL-C-24308	M39029/78- SOCKET CONTACT	432	16	AFM8	K532-1			GS100-1	GP295	DAK95-16B	DRK95-16B
		433
		434
		435

Coaxial Contact Tool Selection Guide

CONNECTOR SERIES

SHIELDED CONTACTS

BIN CODE

CONTACT CAVITY SIZE

INNER CONTACT

SHIELD CRIMP SLEEVE

OUTER CONTACT

INSTALLING TOOL

REMOVAL TOOL

CRIMPING TOOL

POSITIONER

CRIMPING TOOL

POSITIONER OR DIE (CAVITY)

CRIMPING TOOL

POSITIONER OR DIE (CAVITY)