DMC TOOLS INDONESIA – CRiMP-TECH AUSTRALIA

PRODUCTS
- Backshell ToolingThe evolution of circular connectors has produced a multitude of configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA® system was developed.
- Banding ToolsThe termination of EMI/RFI shielding materials is a specialised science in today’s aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the world’s leading connector accessory manufacturers and standards organisations to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defence system contractors. The resulting products afford the user a repeatable and reliable means of terminating shielding on aerospace wiring systems. Tooling is available for all bands qualified to AS85049/128
- Battery Crimp ToolsCrimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service. Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems. These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered…
- Connectors
- Crimp Tool GaugesWith the need to ensure that your tooling die sets, positioners, turret heads and also the indent crimp tools is in calibration and conforms to the required standards, DMC have a large range of GO NO-GO Gauges available for a variety of applications. If you do not know the required GO NO-GO gauge please contact us for assistance.
- Cutting & Stripping ToolsCable preparation is an essential part of wiring system practices, and have the right tool to prepare our cable for crimping of contacts, terminals or lugs is critical. It is important not to damage the insulation on conductors, cable shielding or damage the copper or fibre that will be transmitting the signal down you cable.
- DMC Tool KitsBuilding a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all serviceable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. Crimp-Tech and DMC has this knowledge and does the technical research for them.
- Hand Crimp ToolsCrimp-Tech Australia offers a range of Military and Commercial Hand Crimp Tools. Here you will find a range of these products, if the particular tool you are looking for is not listed please contact us.
- Harting Tool Kits
- Heat GunsHeat Guns and Hot Air Hand Tools
- Hydraulic Crimp Tools
- Insertion/Removal ToolsDMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in these reference table, we have many more for other connector applications. Please contact us for more details.
- LaceLok®LaceLok® Cable Lacing Fasteners are used as secondary support for cable and wire bundling. Developed to replace cable ties and hand tied lacing tape, LaceLok® provides an ergonomic solution for consistent bundling with unrivaled strength and superior performance.
- Misc Tools
- Pneumatic Crimp Tools
- Safe-T-CableSafe-T-Cable™ is constructed of high tensile strength, stranded cable. It is more flexible than its Safety Wire counterpart, although the working diameters are equivalent. This provides a stronger assembly which has greater strength and lighter weight. The cable ends are electrically fused to form an easy threading end.
- Terminals
- Test EquipmentTest Equipment
- Torque Wrenches
Resources
Tool Selection Search
Tooling Guides
About Us
Contact Us
Search for:

DMC Tools Indonesia | Authorised Daniels Manufacturing Corporation Distributor | Crimp-Tech Australia

Your Trusted Source for Genuine DMC Tools in Indonesia

Crimp-Tech Australia is proud to support aerospace, defence, aviation maintenance and high-reliability manufacturing organisations throughout Indonesia with genuine Daniels Manufacturing Corporation (DMC®) tooling.

As an Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation, we supply genuine DMC crimp tools, insertion and extraction tools, connector tooling, Safe-T-Cable® systems, calibration equipment and wiring system support products directly to customers across Indonesia. Crimp-Tech is listed by DMC as the authorised distributor for Indonesia, providing local access to genuine products and technical support.

Whether you operate in commercial aviation, defence, helicopter maintenance, electrical manufacturing, rail, marine or specialised industrial applications, Crimp-Tech Australia provides the technical expertise and product knowledge required to support your electrical wiring interconnect system (EWIS) requirements.

Supporting Indonesia’s Growing Aerospace Industry

Indonesia has one of the largest aviation sectors in Southeast Asia, supported by commercial airlines, military aviation, aerospace manufacturing, maintenance repair organisations (MROs), and government defence programs.

As aircraft fleets continue to expand, maintaining wiring system integrity is essential. High-quality crimp termination tools are critical to producing reliable electrical connections that comply with international aerospace standards.

Daniels Manufacturing Corporation has supplied qualified aerospace tooling for more than 70 years and is recognised worldwide for precision tooling used on aircraft, defence systems, satellites, naval vessels and other high-reliability applications. DMC has been a Qualified Products List (QPL) supplier since the first QPL was established in 1971.

Why Purchase Genuine DMC Tools?

Using genuine Daniels Manufacturing Corporation tools provides confidence that every crimp, insertion and extraction operation is completed using equipment designed specifically for aerospace and defence applications.

Benefits include:

Genuine DMC manufactured products
Precision engineered tooling
Qualified products for MIL-DTL-22520 applications
Repeatable crimp performance
Long service life
Worldwide technical support
Full manufacturer documentation
Access to calibration and repair services

Purchasing from an authorised distributor also helps protect organisations from counterfeit or unqualified products that may not meet required performance standards. DMC has warned that imitation tools marketed as Mil-Spec compliant may not be qualified and can present significant risks for aerospace and defence applications.

Products Available for Customers Throughout Indonesia

Crimp-Tech supplies the complete Daniels Manufacturing Corporation product range including:

Aerospace Crimp Tools

AF8 Crimp Tools
AFM8 Crimp Tools
MH860 Series
M22520 Qualified Crimp Tools
HX3 and HX4 Systems
Hydraulic Crimp Tools
Pneumatic Crimp Tools
Battery Powered Crimp Tools

Positioners & Turret Heads

We supply hundreds of genuine DMC turret heads and positioners designed for military and aerospace connector systems.

Contact Insertion & Removal Tools

Professional insertion and extraction tools suitable for circular connectors, rectangular connectors and specialised aerospace applications.

Connector Backshell Tooling

Complete backshell assembly tooling including adaptor tools and torque tools for installing and removing connector accessories.

Safe-T-Cable® Systems

The patented Safe-T-Cable® fastening system offers significant installation time savings compared with traditional lockwire while maintaining the security required for aerospace and defence applications.

Wire Harness Tooling

Wire stripping tools
Wire preparation tools
Pull testers
Inspection gauges
Calibration gauges
Aircraft maintenance tool kits

Calibration Services

Precision tooling requires regular calibration to ensure continued accuracy and compliance.

Crimp-Tech Australia provides calibration and technical support services for Daniels Manufacturing Corporation tooling, helping customers maintain confidence in their tooling performance while supporting quality management systems and maintenance programs.

Calibration services assist organisations operating under:

AS9100
ISO 9001
Defence Quality Systems
Aircraft Maintenance Organisations
Manufacturing Quality Systems

Industries We Support

Our Indonesian customers operate across numerous industries including:

Commercial Aviation

Supporting airlines, maintenance organisations and component overhaul facilities with qualified wiring system tooling.

Defence

Supplying tooling suitable for military aircraft, naval systems, defence electronics and land vehicle programs.

Aerospace Manufacturing

Supporting OEMs and subcontract manufacturers producing high-reliability electrical harnesses and connector assemblies.

Helicopter Maintenance

Providing specialised tooling for rotary-wing maintenance operations.

Rail

Reliable crimp tooling for transport electrical systems.

Marine

Supporting commercial and defence marine electrical wiring systems.

High Reliability Electronics

Precision tooling for mission-critical electrical interconnection systems.

Why Choose Crimp-Tech Australia?

Customers throughout Indonesia choose Crimp-Tech because we offer more than product supply.

Our experienced technical team assists customers with:

Product selection
Cross-reference identification
Tooling recommendations
Calibration advice
Technical documentation
Genuine replacement parts
Fast quotation turnaround
International shipping

We understand the requirements of aerospace and defence customers and work closely with Daniels Manufacturing Corporation to provide accurate technical advice and responsive customer support.

Fast Supply to Indonesia

Crimp-Tech regularly supplies customers throughout Indonesia.

Products can be shipped directly from Australia, providing:

Genuine manufacturer products
Competitive lead times
Technical support
Export documentation
International freight options
Ongoing customer assistance

Frequently Asked Questions

Are you an authorised DMC distributor for Indonesia?

Yes. Daniels Manufacturing Corporation lists Crimp-Tech Australia as an authorised distributor serving customers in Indonesia.

Can you supply calibration services?

Yes. We provide calibration support and can assist customers with maintaining their DMC tooling.

Do you supply all DMC products?

Yes. We can source the complete Daniels Manufacturing Corporation product range including crimp tools, insertion and extraction tools, positioners, turret heads, Safe-T-Cable®, backshell tooling, maintenance kits and accessories.

Can you help identify the correct crimp tool?

Absolutely. Our experienced team can assist with identifying the correct DMC tooling for your connector, contact and wire application.

Contact Crimp-Tech Australia

If your organisation in Indonesia requires genuine Daniels Manufacturing Corporation tooling, contact Crimp-Tech Australia today.

Our experienced team can assist with:

Product recommendations
Technical advice
Quotations
Calibration enquiries
Export supply
Large project support

Crimp-Tech Australia

Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation (DMC®)

Supplying genuine aerospace tooling throughout Indonesia and the Asia-Pacific region.