PRODUCTS
- Backshell ToolingThe evolution of circular connectors has produced a multitude of configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA® system was developed.
- Banding ToolsThe termination of EMI/RFI shielding materials is a specialised science in today’s aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the world’s leading connector accessory manufacturers and standards organisations to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defence system contractors. The resulting products afford the user a repeatable and reliable means of terminating shielding on aerospace wiring systems. Tooling is available for all bands qualified to AS85049/128
- Battery Crimp ToolsCrimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service. Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems. These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered…
- Connectors
- Crimp Tool GaugesWith the need to ensure that your tooling die sets, positioners, turret heads and also the indent crimp tools is in calibration and conforms to the required standards, DMC have a large range of GO NO-GO Gauges available for a variety of applications. If you do not know the required GO NO-GO gauge please contact us for assistance.
- Cutting & Stripping ToolsCable preparation is an essential part of wiring system practices, and have the right tool to prepare our cable for crimping of contacts, terminals or lugs is critical. It is important not to damage the insulation on conductors, cable shielding or damage the copper or fibre that will be transmitting the signal down you cable.
- DMC Tool KitsBuilding a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all serviceable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. Crimp-Tech and DMC has this knowledge and does the technical research for them.
- Hand Crimp ToolsCrimp-Tech Australia offers a range of Military and Commercial Hand Crimp Tools. Here you will find a range of these products, if the particular tool you are looking for is not listed please contact us.
- Harting Tool Kits
- Heat GunsHeat Guns and Hot Air Hand Tools
- Hydraulic Crimp Tools
- Insertion/Removal ToolsDMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in these reference table, we have many more for other connector applications. Please contact us for more details.
- LaceLok®LaceLok® Cable Lacing Fasteners are used as secondary support for cable and wire bundling. Developed to replace cable ties and hand tied lacing tape, LaceLok® provides an ergonomic solution for consistent bundling with unrivaled strength and superior performance.
- Misc Tools
- Pneumatic Crimp Tools
- Safe-T-CableSafe-T-Cable™ is constructed of high tensile strength, stranded cable. It is more flexible than its Safety Wire counterpart, although the working diameters are equivalent. This provides a stronger assembly which has greater strength and lighter weight. The cable ends are electrically fused to form an easy threading end.
- Terminals
- Test EquipmentTest Equipment
- Torque Wrenches
Resources
Tool Selection Search
Tooling Guides
About Us
Contact Us
Search for:

DMC Tools Malaysia | Authorised Daniels Manufacturing Corporation (DMC®) Distributor | Crimp-Tech Australia

Supporting Malaysia’s Growing Aerospace MRO Industry with Genuine DMC Tools

Malaysia has become one of Southeast Asia’s leading aerospace Maintenance, Repair and Overhaul (MRO) hubs, serving commercial airlines, defence organisations and aerospace manufacturers throughout the Asia-Pacific region.

Crimp-Tech Australia is proud to support this rapidly growing industry by supplying genuine Daniels Manufacturing Corporation (DMC®) tooling, calibration services and technical expertise to customers across Malaysia.

As the Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation, Crimp-Tech provides Malaysian organisations with access to the complete DMC product range, including qualified aerospace crimp tools, connector tooling, insertion and extraction tools, Safe-T-Cable® systems and professional calibration services.

Whether you are maintaining commercial aircraft, supporting military fleets, manufacturing electrical wiring harnesses or producing high-reliability electronic systems, Crimp-Tech can provide the tooling and technical support required to meet the demanding standards of the aerospace industry.

Malaysia – A Leading Aerospace MRO Hub

Malaysia has established itself as one of the fastest-growing aerospace centres in the Asia-Pacific region.

The country’s strategic location, skilled workforce and significant investment in aviation infrastructure have attracted airlines, aircraft manufacturers and international Maintenance, Repair and Overhaul (MRO) providers.

Today, Malaysia supports:

Commercial airline maintenance
Wide-body aircraft overhaul
Component repair
Engine maintenance
Defence aviation support
Aircraft manufacturing
Electrical harness production
Aviation training
Aerospace engineering

As aircraft fleets continue to expand throughout Asia, demand for qualified aerospace tooling continues to increase.

Why Aerospace Organisations Choose Daniels Manufacturing Corporation

For more than 70 years, Daniels Manufacturing Corporation has been recognised worldwide as the leading manufacturer of qualified aerospace wiring system tools.

DMC tooling is trusted by aircraft manufacturers, military organisations, aerospace maintenance providers and defence contractors worldwide because it delivers:

Precision crimp performance
Consistent repeatability
Long service life
Qualified MIL-DTL-22520 tooling
Excellent reliability
Worldwide industry acceptance

Using genuine DMC tooling helps ensure electrical connections meet the demanding quality requirements expected within modern aircraft and defence systems.

Complete DMC Product Range Available in Malaysia

Crimp-Tech Australia supplies the full Daniels Manufacturing Corporation product portfolio.

Aerospace Crimp Tools

Including:

AF8 Crimp Tool
AFM8 Precision Crimp Tool
MH860 Series
M22520 Qualified Crimp Tools
HX3 and HX4 Crimp Systems
Hydraulic Crimp Tools
Pneumatic Crimp Tools
Battery Powered Crimp Tools

Positioners & Turret Heads

A comprehensive range of genuine DMC positioners and turret heads suitable for military, aerospace and industrial connector systems.

Contact Insertion & Removal Tools

Professional insertion and extraction tools for:

Circular connectors
Rectangular connectors
Military connectors
Aerospace connector systems

Connector Assembly Tools

Complete backshell installation tooling, torque tools and specialised assembly equipment.

Safe-T-Cable®

The patented Safe-T-Cable® fastening system provides a faster, safer and more consistent alternative to traditional lockwire and is widely used throughout aerospace and defence applications.

Inspection Equipment

Including:

Go / No-Go Gauges
Pull Test Equipment
Wire Preparation Tools
Wire Stripping Equipment
Maintenance Tool Kits
Calibration Accessories

Calibration Services

Maintaining accurate tooling is essential within every aerospace maintenance organisation.

Crimp-Tech Australia provides calibration support for Daniels Manufacturing Corporation tooling, helping Malaysian customers maintain confidence in their equipment while supporting internal quality systems.

Our calibration services include:

Crimp Tool Calibration
Functional Inspection
Indent Verification
Tool Assessment
Maintenance Recommendations
Calibration Certificates
Traceable Calibration Records

Calibration supports organisations operating under:

AS9100
ISO 9001
Civil Aviation Authority requirements
Defence Quality Systems
Internal Quality Management Systems

Supporting Malaysia’s Aerospace MRO Industry

Maintenance organisations depend on precision tooling to ensure every electrical termination meets the highest quality standards.

Crimp-Tech understands the operational requirements of:

Airline maintenance facilities
Aircraft overhaul centres
Defence maintenance organisations
Helicopter maintenance
Aircraft manufacturing
Component repair facilities
Electrical harness manufacturers
Aviation training organisations

Our technical team assists customers in selecting the correct tooling, maintaining calibration schedules and supporting long-term tooling requirements.

Why Buy from Crimp-Tech Australia?

Purchasing through an authorised Daniels Manufacturing Corporation distributor provides confidence that every product is genuine and fully supported.

Customers benefit from:

Genuine DMC products
Technical product support
Fast quotations
Product selection assistance
Calibration services
Genuine spare parts
Export documentation
Responsive customer service
Long-term technical support

We understand the importance of quality, traceability and reliability within the aerospace industry.

Fast Supply Throughout Malaysia

Crimp-Tech Australia supplies customers across Malaysia, including organisations located in:

Kuala Lumpur
Subang
Selangor
Penang
Johor
Malacca
Kota Kinabalu
Kuching

We provide:

International freight
Export documentation
Technical assistance
Competitive delivery times
Ongoing product support

Our location within the Asia-Pacific region enables us to respond quickly to Malaysian customer requirements.

Frequently Asked Questions

Are you an authorised Daniels Manufacturing Corporation distributor?

Yes. Crimp-Tech Australia is the Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation and supplies genuine DMC products throughout Malaysia.

Do you provide calibration services?

Yes. We provide calibration support for DMC tooling to assist customers in maintaining tooling performance and quality compliance.

Can you assist with selecting the correct crimp tool?

Absolutely. Our experienced technical team can recommend the correct crimp tool, positioner, turret head or insertion and extraction tool based on your connector and wire application.

Do you support aerospace MRO organisations?

Yes. Supporting aerospace Maintenance, Repair and Overhaul organisations is one of our core areas of expertise. We understand the importance of tooling accuracy, traceability and ongoing calibration for aircraft maintenance operations.

Contact Crimp-Tech Australia

If your organisation in Malaysia requires genuine Daniels Manufacturing Corporation tooling, Crimp-Tech Australia is ready to assist.

Our experienced team can provide:

Product recommendations
Technical advice
Calibration enquiries
Quotations
Export supply
Fleet tooling support
Long-term technical assistance

Whether you require a single crimp tool or a complete tooling solution for an aircraft maintenance facility, Crimp-Tech Australia delivers the genuine products, technical expertise and responsive service your organisation can rely on.

Crimp-Tech Australia

Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation (DMC®)

Supporting Malaysia’s expanding aerospace MRO industry with genuine DMC tooling, calibration services and expert technical support.