PRODUCTS
- Backshell ToolingThe evolution of circular connectors has produced a multitude of configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA® system was developed.
- Banding ToolsThe termination of EMI/RFI shielding materials is a specialised science in today’s aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the world’s leading connector accessory manufacturers and standards organisations to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defence system contractors. The resulting products afford the user a repeatable and reliable means of terminating shielding on aerospace wiring systems. Tooling is available for all bands qualified to AS85049/128
- Battery Crimp ToolsCrimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service. Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems. These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered…
- Connectors
- Crimp Tool GaugesWith the need to ensure that your tooling die sets, positioners, turret heads and also the indent crimp tools is in calibration and conforms to the required standards, DMC have a large range of GO NO-GO Gauges available for a variety of applications. If you do not know the required GO NO-GO gauge please contact us for assistance.
- Cutting & Stripping ToolsCable preparation is an essential part of wiring system practices, and have the right tool to prepare our cable for crimping of contacts, terminals or lugs is critical. It is important not to damage the insulation on conductors, cable shielding or damage the copper or fibre that will be transmitting the signal down you cable.
- DMC Tool KitsBuilding a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all serviceable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. Crimp-Tech and DMC has this knowledge and does the technical research for them.
- Hand Crimp ToolsCrimp-Tech Australia offers a range of Military and Commercial Hand Crimp Tools. Here you will find a range of these products, if the particular tool you are looking for is not listed please contact us.
- Harting Tool Kits
- Heat GunsHeat Guns and Hot Air Hand Tools
- Hydraulic Crimp Tools
- Insertion/Removal ToolsDMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in these reference table, we have many more for other connector applications. Please contact us for more details.
- LaceLok®LaceLok® Cable Lacing Fasteners are used as secondary support for cable and wire bundling. Developed to replace cable ties and hand tied lacing tape, LaceLok® provides an ergonomic solution for consistent bundling with unrivaled strength and superior performance.
- Misc Tools
- Pneumatic Crimp Tools
- Safe-T-CableSafe-T-Cable™ is constructed of high tensile strength, stranded cable. It is more flexible than its Safety Wire counterpart, although the working diameters are equivalent. This provides a stronger assembly which has greater strength and lighter weight. The cable ends are electrically fused to form an easy threading end.
- Terminals
- Test EquipmentTest Equipment
- Torque Wrenches
Resources
Tool Selection Search
Tooling Guides
About Us
Contact Us
Search for:

DMC Tools Singapore | Authorised Daniels Manufacturing Corporation (DMC®) Distributor | Crimp-Tech Australia

Supporting Singapore’s World-Class Aerospace and Defence Industries with Genuine DMC Tooling

Crimp-Tech Australia is proud to supply genuine Daniels Manufacturing Corporation (DMC®) tooling and calibration services to customers throughout Singapore.

As the Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation, Crimp-Tech supports Singapore’s leading aerospace, defence, maintenance, manufacturing and electronics organisations with genuine DMC crimp tools, insertion and extraction tools, Safe-T-Cable® systems, connector tooling and calibration services.

With decades of experience supplying the aerospace and defence industries, Crimp-Tech has developed strong relationships with major organisations across the Asia-Pacific region, including long-standing support for companies such as ST Engineering Aerospace Services Company, one of Singapore’s leading aerospace and defence technology groups. Our experience supplying DMC tooling and calibration services enables us to understand the stringent quality, traceability and reliability requirements expected within aerospace and defence programmes.

Supporting Singapore’s Aerospace Excellence

Singapore is recognised as one of the world’s leading aviation maintenance and aerospace engineering hubs.

The country is home to internationally respected Maintenance, Repair and Overhaul (MRO) organisations, defence manufacturers, electronics companies and aircraft engineering specialists supporting both civil and military aviation throughout the Asia-Pacific region.

Producing reliable electrical wiring systems requires precision tooling that delivers repeatable, qualified crimps every time.

For more than 70 years, Daniels Manufacturing Corporation has been recognised worldwide as the industry leader in aerospace wiring system tooling. DMC has supplied qualified tooling to aircraft manufacturers, defence contractors, military organisations and maintenance facilities around the world and has been a Qualified Products List (QPL) supplier since the first QPL was established in 1971.

Trusted by Singapore’s Aerospace Industry

Crimp-Tech Australia has supplied DMC tooling and calibration services to customers across Singapore for many years.

Our experience supporting organisations including ST Engineering has provided valuable insight into the operational requirements of:

Aircraft maintenance facilities
Defence manufacturing
Military aviation
Commercial aviation
Aerospace component manufacturing
Electrical harness production
High-reliability electronic assembly

We understand that quality, traceability and compliance are essential to every aerospace project.

Genuine Daniels Manufacturing Corporation Products

Crimp-Tech supplies the complete Daniels Manufacturing Corporation product range.

Aerospace Crimp Tools

Including industry-standard tooling such as:

AF8 Crimp Tool
AFM8 Precision Crimp Tool
MH860 Series
M22520 Qualified Crimp Tools
HX3 and HX4 Indent Crimp Systems
Hydraulic Crimp Tools
Pneumatic Crimp Tools
Battery Powered Crimp Tools

Positioners and Turret Heads

We supply hundreds of genuine DMC positioners and turret heads for aerospace connector systems used throughout commercial aviation and defence applications.

Contact Insertion and Removal Tools

Professional insertion and extraction tools designed for military and aerospace connectors.

Connector Assembly Tooling

Including backshell installation tools, torque tools and specialised connector accessories.

Safe-T-Cable® Systems

The patented Safe-T-Cable® system provides a faster, safer and more consistent alternative to traditional lockwire for aerospace and defence applications.

Inspection and Test Equipment

Our product range also includes:

Go/No-Go Gauges
Pull Test Equipment
Wire Preparation Tools
Wire Stripping Equipment
Maintenance Tool Kits
Calibration Accessories

DMC Tool Calibration Services

Maintaining tooling accuracy is critical within aerospace and defence environments.

Crimp-Tech Australia provides professional calibration support for Daniels Manufacturing Corporation tooling, helping organisations maintain confidence in the performance and repeatability of their equipment.

Our calibration services include:

Crimp Tool Calibration
Indent Verification
Go/No-Go Gauge Inspection
Functional Testing
Tool Assessment
Maintenance Recommendations
Calibration Certificates
Traceable Records

Calibration supports compliance with quality management systems including:

AS9100
ISO 9001
Civil Aviation Authority requirements
Defence Quality Systems
Internal Quality Assurance programmes

Why Purchase Through Crimp-Tech Australia?

Purchasing from an authorised DMC distributor ensures customers receive:

Genuine Daniels Manufacturing Corporation products
Manufacturer-supported tooling
Current product information
Technical assistance
Calibration support
Genuine replacement parts
Product traceability
Export documentation
Responsive customer service

DMC has warned the aerospace industry about counterfeit and unqualified crimp tools that may not meet required aerospace specifications. Purchasing through an authorised distributor helps protect organisations from these risks while ensuring compliance with manufacturer requirements.

Industries We Support

Crimp-Tech supplies organisations throughout Singapore operating in:

Aerospace Maintenance (MRO)

Supporting commercial aircraft maintenance with qualified crimp tooling and calibration services.

Defence

Supplying tooling for military aviation, naval systems, defence electronics and communications equipment.

Aircraft Manufacturing

Providing tooling for electrical harness production and aircraft assembly.

Electronics Manufacturing

Supporting manufacturers producing high-reliability electrical assemblies and electronic systems.

Marine and Offshore

Supplying specialised tooling for critical electrical installations.

Rail and Industrial Manufacturing

Supporting electrical assembly operations requiring repeatable, high-quality crimps.

Fast Supply to Singapore

Crimp-Tech Australia provides reliable export services to customers throughout Singapore.

We offer:

Competitive international shipping
Technical product support
Fast quotation turnaround
Calibration services
Genuine replacement parts
Long-term customer support

Our proximity within the Asia-Pacific region enables us to provide responsive service and technical assistance for customers across Singapore.

Frequently Asked Questions

Are you an authorised Daniels Manufacturing Corporation distributor?

Yes. Crimp-Tech Australia is the Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation and supplies genuine DMC products throughout Singapore.

Do you provide calibration services?

Yes. We provide calibration support for DMC tooling, helping customers maintain tooling performance and compliance with quality management systems.

Can you assist with tool selection?

Absolutely. Our experienced technical team can recommend the correct crimp tool, turret head, positioner or insertion and extraction tool based on your connector and contact requirements.

Do you supply large aerospace and defence organisations?

Yes. Crimp-Tech has extensive experience supporting aerospace, defence and high-reliability manufacturers across the Asia-Pacific region, including long-standing supply relationships with organisations such as ST Engineering.

Contact Crimp-Tech Australia

Whether you require a single crimp tool or a complete tooling solution for an aerospace or defence programme, Crimp-Tech Australia can assist.

Contact our experienced team for:

Product recommendations
Technical advice
Calibration enquiries
Quotations
Export supply
Fleet and project tooling
Ongoing technical support

Crimp-Tech Australia

Authorised Asia-Pacific Distributor for Daniels Manufacturing Corporation (DMC®)

Supporting Singapore’s aerospace, defence and manufacturing industries with genuine DMC tooling, calibration services and expert technical support.