Mid-Current Range Adjustable Indent Crimp Tools
For power supply and power management applications, DMC offers our Industrial Mid-Current Range Adjustable Crimp Tools which have virtually limitless applications within the specified wire range of 6 through 18 AWG. The tools are used widely in the marine, rail, power generation, solar, and heavy transportation industries.
The Mid-Current Range Adjustable Crimp Tools are similar to our Standard Adjustable indent Crimp Tool but have an enlarged crimp cavity to accommodate mid-current power contacts. Turret heads and positioners are available to adapt the tool frames to your specific contact/wire combination. The 8 impression crimp assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations are available upon request.
For proper operation, the tool must be mated with a multi-position turret head (or a single-position positioner. These are attached by orienting the positioner in the keyed position and by tightening the hex socket screws provided as part of the positioner.
A permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used.
On most models, crimp depth is controlled by a position selector knob located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire.
As with our Military Standard crimp tools, the cycle controlled ratchet assures a complete crimp every time. The carefully engineered design achieves the absolute maximum mechanical advantage.
Periodic gaging is recommended to insure accurate calibration. This can be done easily by setting the tool selector knob to the designated position and checking indenter closure with the “GO/NO-GO” gage designated for each tool.
These tools measure 9.75″ x 2.5″ x 1.25″ approximately and weighs less than a pound.
NOTE: Crimping wires and contacts in this range requires increased hand force in comparison with other common hand crimpers, therefore use of this hand tool should be limited to short run production and maintenance applications.
Powered versions of these tools can be found PNEUMATIC VERSIONS.
The M320 is designed for Siemens Industrial Automation contacts, 6FX2003 Series. The M320 crimps both the conductor and the insulation. This tool is NOT available in a pneumatic version.
M320 APPLICATIONS |
|
POSITIONER P/N |
CONTACT MFG. & PART NUMBER |
| TH579-1 | Siemens Industrial Automation 6FX2003-5AA00 (Conductor) Siemens Industrial Automation 6FX2003-5AB00 (Insulation) |
| TH580-1 | Siemens Industrial Automation 6FX2003-5AC00 (12 & 16 Conductor, Insulation) |
| TH581-1 | Siemens Industrial Automation 6FX2003-5AD00 (Conductor, Insulation) |
The M300BT is designed for pin and socket contracts, AWG sizes 6-14. This tool is available in a pneumatic version, P/N: WA27-300BT-EP.
M300BT APPLICATONS |
|
POSITIONER P/N |
CONTACT MFG. & PART NUMBER |
| SP587 | BURNDY RC14P1EOPI-RC12P1EOPI & RC10P1EOPI |
| SP593 | SOCAPEX CONTACTS-SOURIAU 8400 TOOL |
| SP604 | DEUTSCH 047 1325 08 & 047 1326 08 |
| SP708 | DEUTSCH 1841-5-5608 & 18-007-08-9056 |
| SP858 | TYCO # 213552-2 2, 211161-1 |
| TP1018 | ROSEMONT SST SLEEVE |
| TP1029 | (MAC MISSILE SYSTEMS) U.S. NAVY |
| TP1031 | CROUSE HINDS 314263-110 PIN |
| TP1032 | CROUSE HINDS 314262-110 SKT. |
| TP1033 | BG SERVICE 22344-ASS’Y |
| TP1054 | CROUSE HINDS A600568 MINI-CHANGE STYLE III, 600565 |
| TP1055 | CROUSE HINDS A600568 STYLE MINI-LINE, 600566 GRN PIN |
| TP1059 | HARTING 09030006214, 09030006215 |
| TP1060 | CROUSE HINDS P1315209-270, -260, -250, -240, -230 |
| TP1062 | CROUSE HINDS P314262-150, -140, -130, -120 |
| TP1064 | CROUSE HINDS P1315366-130, -120, -110 |
| TP1077 | DELTA TECH SLEEVE STOP / COIL ASS’Y |
| TP1097 | MULTI-CONTACT FRANCE 4FL 4 295 00 |
| TP1111 | AMPHENOL SOCAPEX 17DM53745-201, 17DM53744-201 |
| TP1114 | HYPERTRONICS YSK035-058GT |
| TP1151 | TYCO 212007, 212008, 211159 & 211161 |
| TP1159 | RADIALL 616366 |
| TP1169 | BURNDY 82911679N |
| TP1188 | AMPHENOL SOCAPEX 900198-91 |
| TP1193 | CKB S24923-000A3 |
| TP1194 | CKB S24924-000 A3 |
| TP1222 | WIELAND Z2 124 9521 0 |
| TP1240 | REF. FISCHER WIRE & PLASTIC |
| TP1286 | MULTI-CONTACT 7-1261-01e & 7-2102-08 |
| TP1318 | FRAMATOME 8902-210 & 8902-225 |
| TP1378 | CORY CMP004-103 & FCT FMP004-13 |
| TP1401 | GAUTHIER G7500-P10-A0 |
| TP1404 | BURNDY 360J2224B7 |
| TP714 | SOURIAU 8476-28, 57888, 62622 |
| TP799 | 8476-206 |
| TP800 | 8476-207 |
| TP823 | RADIALL 282 551 |
| TP826 | ITT CANNON CDR897-0003, -0006 |
| TP827 | ITT CANNON CDR897-0004, -0007 |
| TP852 | CONTACT # E. F. JOHNSON P/N 12-2989-0528-7 |
| TP870 | ITT CANNON #031-0909-000, 031-0908-000 |
| TP887 | MULTI-CONTACT USA 05,0004 |
| TP894 | INTERCONNEXION CB-148-8-P, CD132-8-S |
| TP905 | JUPITER M-8-MS, K-8-MS OCETA |
| TP907 | AECMA EN3155-044, EN3155-045 |
| TP908 | FRB CONNECTRON 0350-24 |
| TP910 | FRB CONNECTRON 80-0200, 0200-47 |
| TP916 | SOURIAU 8819-118, 8819-119 |
| TP924 | SN 2377K100 |
| TP927 | LIVINGSTON 51469-1 (OCETA) |
| TP929 | ELCON 702-31-01107 |
| TP936 | SOURIAU 8819-176 & -177 |
| TP967 | ITT CANNON 020436Y0000, 020437Y0000 SIZE 12 |
| TP968 | ITT CANNON 020434Y0000, 0204357Y0000 SIZE 8 & 12 |
| TP978 | C.K.B. 0371-0004AS0, 0371-0003AS0 |
| TP982 | AMPHENOL 17-766-02 |
| TP986 | AIR LB P/N 001104-620 & 001104-630 |
| TH558 | BURNDY 3401040 |
| TH579 | Siemens Industrial Automation 6FX2003-5AA00 (Conductor) Siemens Industrial Automation 6FX2003-5AB00 (Insulation) |
| TH580 | Siemens Industrial Automation 6FX2003-5AC00 (16 & 12 Conductor, Insulation) |
| TH581 | Siemens Industrial Automation 6FX2003-5AD00 (Conductor, Insulation) |
| TH632 | Siemens Industrial Automation 6FX2003-5AC00 (10 & 8 Conductor, Insulation) |
| TH640 | Siemens Industrial Automation 6FX2003-4AB00 (Conductor, Insulation) |
| TH641 | Siemens Industrial Automation 6FX2003-4AC00 (16 & 12 Conductor, Insulation) |
The M309 is designed for pin and socket contracts, AWG sizes 8-18. This tool is available in pneumatic versions, P/Ns: WA27-309-2C, WA27-309, WA27-309-EP.
M309 APPLICATIONS |
|
POSITIONER P/N |
CONTACT MFG. &
|
| TP1014 | REF EWC |
| TP1058 | HARTING 09030006213 |
| TP1061 | CROUSE HINDS P1315209-210 |
| TP1063 | CROUSE HINDS P314262-110 |
| TP1067 | CROUSE HINDS 1463105-110, -120, 1463106-110, -120 |
| TP1071 | FCT FMP002P-, 002P-A, ETC. |
| TP1072 | FMP002 & -, 002S-A, ETC. |
| TP1073 | FCT FMP01-, FMP043S |
| TP1074 | FCT FMP018S -, FMP043S |
| TP1075 | FMP018P -, 043P |
| TP1087 | CROUSE HINDS 600221 |
| TP1094 | TYCO 193796-1, 193797-1, 193841-1, 19382-1 |
| TP1116 | POSITRONIC *C4008D, *C4012D, *C4016D |
| TP1122 | M50130A |
| TP1123 | T & B 222-14-148 OR HARTING 0903006215 |
| TP1124 | TYCO 2-194035-2, -4, -5, -7, -8, & 3-19035-1, -0, -3 |
| TP1125 | TYCO 194032-5, -7 |
| TP1132 | SOURIAU 8291-1682, 8-1683N |
| TP1138 | CONMED 20063 |
| TP1141 | NABSON 062095 |
| TP1150 | MULTI-CONTACT 32-0100 & 32-0500 |
| TP1152 | ODU 345 24 2315 401 |
| TP1156 | BOSTON SCIENTIFIC CORP. BURNDY CONNECTOR |
| TP1164 | SODERBER DS0009B |
| TP1179 | HYPERTRONICS YPN025-002G, YSK025-003AH, YPN025-003G, YSK025-004AH |
| TP1214 | TYCO 212007-1 / 212008-1 |
| TP1221 | TYCO 194245 |
| TP1224 | TYCO 212013-1 & 212014-1 |
| TP1235 | TYCO 194189 |
| TP1244 | GM POWERTRAIN SOCKET CONTACT |
| TP1247 | TYCO 193846-1 |
| TP1264 | CONEC 610FET1A |
| TP1265 | CONEC 610FET2A |
| TP1266 | BURNDY JVSP00080B & JVSS00080B |
| TP1284 | HYPERTRONICS YSK025-031 & YPN025-024 |
| TP1296 | WIELAND Z2 124 9521 0 |
| TP1317 | GEOSERVICES 4805-136 |
| TP1320 | RETCONN 22-1013 & 22-1036 |
The M300-25A is designed for Pyle National Starline pin and socket contacts, AWG sizes 10-18. This tool is available in a pneumatic version, P/N: WA27-300-25A.
M300-25A APPLICATIONS |
|
POSITIONER P/N |
CONTACT MFG. & PART NUMBER |
| TP682-1 | PYLE NAT. # 16 & #18 |
| TP683-1 | PYLE NAT. #12 PINS |
| TP684-1 | PYLE NAT. #10 P&S, & #12 SOCKETS |
The M310 is designed for pin and socket contracts, AWG sizes 8-16 and has an enlarged crimp cavity to accommodate oversized contacts.
M310 APPLICATIONS |
|
POSITIONER P/N |
CONTACT MFG. & PART NUMBER |
| TP1008 | US AIR F18008-08-9056 |
| TP1013 | TYCO 193796-1, 193797-1, 193841-1, 193842-1 |
| TP1019 | TYCO 193837-1 |
| TP1020 | TYCO 193837-2, -3 |
| TP1021 | TYCO 193673-1 |
| TP1022 | TYCO 193673-2, -3 |
| TP1030 | 3M CD353 |
| TP1040 | ARRAY 806-0598-000 & 857-0590-130 |
| TP1041 | ARRAY 806-0599-00A, -00B & 857-0591-130/A, -130/B |
| TP1042 | ARRAY 806-0599-000 & 857-0591-130 |
| TP1068 | TYCO 193990 & 193991 TYPE XII (“S” REMOVED PER AMP) |
| TP1088 | TYCO 193991-1 & -3 (“S” REMOVED PER AMP) |
| TP1154 | REF. AC & E INDUSTRIES |
| TP1162 | HYPERTRONICS YPN006-124H |
| TP1216 | POSITRONIC INDUS. |
| TP1232 | HYPERTRONICS YPN035-005, -006, -007, YSK035-009, -010, -011 |
| TP792 | HYPERTRONICS YPN015-031, YSK015-041 |
| TP793 | HYPERTRONICS YSK025-011 + -02, YPN025-009 + -010 |
| TP802 | FOR FRB CONTACTS 34-0300, 0300-12, 0300-17 |
| TP806 | FRB CONTACTS 0200-03, 0200-29, 0200-36 SOC. |
| TP807 | FRB CONTACTS 31-0200, 58-0200, 64-0200 PIN |
| TP813 | JUPITER CONTACTS BM-2611-5038ST-BF-201-150ST |
| TP814 | FOR FRB CONTACT 29-0300 |
| TP880 | SMIT SLIKKERVEER #F-187306, #F-187307 |
| TP890 | FRB 0250-B-17G, -20G, 18-0250G, 20-0250G |
| TP891 | FRB 13-0350G, 0350-B13G, 0350G, 0350-B-12G |
| TP902 | HYPERTAC HST154 PIN, HST153 SKT |
| TP935 | HYPERTRONICS YSK035-02G, ETC. |
| TP942 | HYPERTRONICS YSK035-048 |
| TP944 | TYCO M310 USE TP944-1 WITH WA27-309-EP |
| TP965 | FRB CONNECTRON 0300-20, 0300-24 |
| TP974 | POSITRONICS |
| TP999 | CONNEI 16600,16601 |
The M321 is designed for the rail transportation industry.
M321 APPLICATIONS |
|
POSITIONER P/N |
CONTACT MFG. & PART NUMBER |
| TP1002 | CKB CC1000C0M006, CC1000C0F006 |
| TP1023 | CKB SE0801-109 & SE0801-108 |
| TP1024 | CKB S24296-000B3 & S24263-000B3 |
| TP1035 | CKB S24265-000A3 |
| TP1036 | CKB S24298-000A3 |
| TP1044 | SOURIAU 8819-176, -177 (SIMILAR TP936 EXCEPT FOR M317) |
| TP1045 | SOURIAU 8819-118, 8819-119 |
| TP1052 | BURNDY J383S1K-0006A01, J383P1K-0006A01 |
| TP1065 | CKB SE1239-007 (P), SE0692-130 (S) |
| TP1080 | CKB 669-65 & 669-67 |
| TP1131 | AMPHENOL SOCAPEX 17DM53744-201, -206, -207, 17DM53745-201, -207, -208 |
| TP1161 | F.C.F. 10A-8638PPC100X, 10A-8638PSC100X, 20A-8638PPC200X, 20A-8638PSC200X, 40A-8638PPC400X, 40A-8638PSC400X |
| TP1163 | FRB CONNECTRON 0200-47/80-0200 |
| TP1338 | CKB SOCKET CONTACT |
| TP1339 | CKB PIN CONTACT |
| TP805 | FRB CONTACTS 0350B11, -B12, -B13, 11-0350, 12-0350, 13-0350 |
| TP909 | FRB CONNECTRON 0200-42, 73-0200 |
| TP911 | FRB CONNECTRON 0300-21, 0300-17, 34-0300, 0300-23, 39-0300 |
| TP912 | FRB CONNECTRON 38 0300 |
| TP957 | HARTING 0932 000 6107, 6207, 6108, 6208 |
| TP971 | C.K.B. 0572-1016A4A |
OTHER MID-RANGE TOOLS
The M316 is designed for crimping Sundstrand Aviation contacts #5905143 onto 16 AWG solid wire.
The M322 is designed for Therm-X Terminal Assembly (pin and socket) contacts.
The M327 is designed for Greene Tweed 5672-1998 (pin and socket) contacts.