THE MAINTENANCE PROBLEM…
Modern aircraft, such as the Sikorsky S70, have complicated electrical wiring systems containing many different connectors, contacts and terminals, the repair of which require precision tools.
It is not a cost effective use of the time of your technical staff to start from scratch and try to become intimately knowledgeable about which precision tools must be used to repair each electrical connector, contact and terminal when DMC has already performed this task for the Sikorsky S70.
AOG TIME CONSTRAINTS.
Once the aircraft becomes inoperable because of a connector failure, it is imperative to be able to replace the connector, contact or terminal as quickly as possible to avoid loss of mission capability due to AOG.
The DMC787 kit supplies your staff with both the information and the tools necessary to make this type of repair to the Sikorsky S70 in the shortest time possible.
THE DMC SOLUTION…
DMC has already researched the list of connectors for the Sikorsky S70 and has identified the most common tools required to maintain the electrical connectors in the Sikorsky S70. DMC has cross referenced these tools to the connectors, contacts and terminals, eliminating costly and time-consuming research which would otherwise have to be performed by your electrical technicians.
IMMEDIATE AVAILABILITY OF TOOLS AND TECHNICAL INFORMATION.
The DMC787 kit contains all of the tooling to connector, contact and terminal cross reference information needed to support the Sikorsky S70. In addition, the DMC787 kit also contains? illustrated operating instructions for the required tooling.
ALL IN ONE.
Since all of these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of
your Sikorsky S70 to service.
DMC787 TOOL & ACCESSORY LIST
5? Crimp Tools
6 Turret Heads
8 Metal Insertion Tools
13 Metal Removal Tools
31 Plastic Ins/Rem Tools
4 Contact gages
1 Unwired Contact Removal Tool w/ Probes
1 Wire Cutter
2 Wire Strippers
1 Strap Wrench w/ Spare Strap
1 In-Service Inspection Gage
1 Die Removal Tool
8 Die Sets
1 Hex Wrench
3 Coaxial Cable Stripper
1 Soft Jaw Plier
1 Illuminated Magnifier
7 Trim Jigs
1 Trim Tool Kit
DMC787 CONNECTOR COVERAGE
MIL-C-24308?Rack & Panel
MIL-C-26482 Series 1 & 2
MIL-C-26500 Firewall Connectors
MIL-C-38999 Series 1, 2, & 3
MIL-C-5015 3100, 3450 Series
MIL-C-81511 Series 3
MIL-C-81703 Series 1
MIL-C-83723 Series 3
MIL-C-83733 Rack & Panel
MIL-S-81824 Environmental Splices
MIL-T-7928 Insulated Terminals/Splices
MIL-T-81714 Terminal Junctions
Dept. of Defense ONO89559, 89560, 89561
Deutsch Common Termination Series
ITT Cannon D*C/D*U, D*M, D*MA, DPAMA, DPK, DPX2MA Series
Litton-Aero D-Sub Connectors
Matrix Science?MRTB Series
Rockwell International Thin-Line I
Amphenol RF RF-Coaxial
Kings Electronics RF-Coaxial
Trompeter RF Twinaxial/Triaxial
Tools contained in this kit have been selected based upon their suitability to service the related connector or contact indicated. Military Standard tools have been utilized wherever possible. These tools are not necessarily the production tools used to manufacture the aircraft and therefore, these tools may or may not correspond to the tools listed in the OEM wiring manual and/or the Chapter 20 Standard Wiring Practices Manual list of approved tooling.
TOOL KIT CONFIGURATION
Type of Case?Portable
Number of Cases 1
Type of Construction Fiberglass/Aluminum
Application Sikorsky S70 Helicopters
Coverage Airframe Power Connectors Terminals size 12 AWG and Smaller
Coaxial Connectors Type of Inserts
Unicellular Polyethylene Foam with Die Cut Tool Cavities