• Facebook
  • Youtube

CRiMP-TECH AUSTRALIA

  • PRODUCTS
    • Backshell ToolingThe evolution of circular connectors has produced a multitude of configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA® system was developed.
    • Banding ToolsThe termination of EMI/RFI shielding materials is a specialised science in today’s aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the world’s leading connector accessory manufacturers and standards organisations to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defence system contractors. The resulting products afford the user a repeatable and reliable means of terminating shielding on aerospace wiring systems. Tooling is available for all bands qualified to AS85049/128
    • Battery Crimp ToolsCrimp-Tech Australia has a range of battery operated crimp tools to crimp a wide range of contacts, terminals and splices . We believe the following information and data will answer your questions. If not please contact us for personalized service. Working on today’s electrical connections calls for increased mobility and repeatable, consistent crimping force so we offer a wide range of battery powered crimp tools designed to integrate with your current tooling systems. These battery powered tools offer the mobility of a hand tool without sacrificing the power of pneumatic tools. In the field or on the factory floor, every tool crimps with the consistency and precision you expect from DMC products. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing die series and compliment our established crimp tool lines. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. So if your workload is too much for hand tools, or pneumatic hoses and power cables are unwelcome, unsafe or impractical for the work environment, a battery powered…
    • Crimp Tool GaugesWith the need to ensure that your tooling die sets, positioners, turret heads and also the indent crimp tools is in calibration and conforms to the required standards, DMC have a large range of GO NO-GO Gauges available for a variety of applications. If you do not know the required GO NO-GO gauge please contact us for assistance.
    • Cutting & Stripping ToolsCable preparation is an essential part of wiring system practices, and have the right tool to prepare our cable for crimping of contacts, terminals or lugs is critical. It is important not to damage the insulation on conductors, cable shielding or damage the copper or fibre that will be transmitting the signal down you cable.
    • DMC Tool KitsBuilding a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all serviceable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. Crimp-Tech and DMC has this knowledge and does the technical research for them.
    • Fibre Optic Products
    • Hand Crimp ToolsCrimp-Tech Australia offers a range of Military and Commercial Hand Crimp Tools. Here you will find a range of these products, if the particular tool you are looking for is not listed please contact us.
    • Heat GunsHeat Guns and Hot Air Hand Tools
    • Hydraulic Crimp Tools
    • Insertion/Removal ToolsDMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in these reference table, we have many more for other connector applications. Please contact us for more details.
    • Misc Tools
    • Pneumatic Crimp Tools
    • Safe-T-CableSafe-T-Cable™ is constructed of high tensile strength, stranded cable. It is more flexible than its Safety Wire counterpart, although the working diameters are equivalent. This provides a stronger assembly which has greater strength and lighter weight. The cable ends are electrically fused to form an easy threading end.
    • Terminals
    • Test EquipmentTest Equipment
    • Torque Wrenches
  • Tooling Guides
    • Backshell Adaptors
    • Banding Tool Guide – One Step
    • Banding Tool Guide – Two Step
    • Common Dies Tooling Guide
      • Coaxial Connectors
      • Coaxial Contact Tool Selection Guide
      • Common Dies Tooling Guide
    • Connector Tooling for Rail Applications
    • Contact Retention Test Tooling Guide
    • DMC Kits – Commercial Airline Guide
    • DMC Kits – General Purpose Guide
    • DMC Kits – Helicopter Kits Guide
    • DMC Kits – Military Kit Guide
    • GMT Tooling Guide
    • Hand Tool Tooling Guide
    • Installing & Removal Tooling Guide
      • Installing & Removal Tooling Guide
      • Unwired Contact Removal Tools
    • Large Gauge Tooling Guide
    • Micro Connectors
    • MIL Spec Circular Indent Crimp Tools
    • Open Frame Tooling Guide
    • Safe-T-Cable Tooling Guide
    • Tensile Test Equipment
    • Wire Preparation Tooling Guide
  • Resources
    • Calibration
    • Catalogues
    • DMC Video Tutorials
    • Product Information
  • About Us
  • Contact Us
  • FAQ
    • News
  • Log In/Register
  • My Quote

Catalogues

 

Connector Tooling Guide 2016 Connector Tooling Guide 2016
Safe-T-Cable Safe-T-Cable
Twist-Strip Catalogue Twist-Strip Catalogue
M85049-128 EMI RFI Shield Banding Tooling Guide M85049-128 EMI RFI Shield Banding Tooling Guide
Beta Backshell Tooling Guide Beta Backshell Tooling Guide
Maintenance Kits For Aerospace Wiring Systems Maintenance Kits For Aerospace Wiring Systems
Connector Tooling For Railway Wiring Applications Connector Tooling For Railway Wiring Applications
Tensile Test Systems Tensile Test Systems
Alphatron Wire Crimp Pull  Tester Alphatron Wire Crimp Pull Tester
Jam Nut Socket Tooling Guide Jam Nut Socket Tooling Guide
DMC Power Contact Wall Chart DMC Power Contact Wall Chart
Terminal Splice Tooling Guide Terminal Splice Tooling Guide
Tooling Guide For AS7928 Mil-Spec Termnials 26 thru 10 AWG Tooling Guide For AS7928 Mil-Spec Termnials 26 thru 10 AWG
Tooling Guide For AS7928 Mil-Spec Termnials 8 thru 4-0 AWG Tooling Guide For AS7928 Mil-Spec Termnials 8 thru 4-0 AWG
AS81969 to DMC Cross Reference AS81969 to DMC Cross Reference
AS22520 to DMC Cross Reference AS22520 to DMC Cross Reference
AS5259 to DMC Cross Reference AS5259 to DMC Cross Reference

 

 

Elpress Full Catalogue Elpress Full Catalogue
Elpress Transformer Catalogue Elpress Transformer Catalogue
Wind Power Wind Power
DUAL SYSTEM DUAL SYSTEM
PVX1300 PVX1300
PVX1300C2 PVX1300C2
PVX611 PVX611
PVL350 PVL350
PVL130L PVL130L
Mini Force Crimp Tools Mini Force Crimp Tools

 

 

TE Connectivity – Application Tooling AD&M TE Connectivity – Application Tooling AD&M
Premium Manual Hand Tools Premium Manual Hand Tools
Commercial Manual Hand Tools Commercial Manual Hand Tools
Insertion Extraction Tools Insertion Extraction Tools
Hydraulic Crimp Tooling Hydraulic Crimp Tooling
Pneumatic Tool System Pneumatic Tool System
Custom Tool Kits Custom Tool Kits
Crimping Machines for Loose Piece Terminals Crimping Machines for Loose Piece Terminals
AT Line Card AT Line Card

 

 

Kitco 2019 Catalogue Kitco 2019 Catalogue
KITCO-Training-Brochure KITCO-Training-Brochure

 

 

Ideal Inductries Inc. Aerospace Ideal Inductries Inc. Aerospace
Lacelok Cable Lacing Fastener Lacelok Cable Lacing Fastener
Lacelok Spec Sheet Lacelok Spec Sheet
PrepPRO Coax UTP Strippers PrepPRO Coax UTP Strippers

 

 

TOOL FOX TOOL FOX
CRIMP HANDY CRIMP HANDY

 

 

Harting Industrial Connectors – 50Mb Harting Industrial Connectors – 50Mb
Han Short Form Catalogue Han Short Form Catalogue
HARTING for Transportation HARTING for Transportation
Ha-VIS eCon Switche broschuere 2019 Ha-VIS eCon Switche broschuere 2019
HaVIS RFID System Components HaVIS RFID System Components
HARTING Current Measurement HARTING Current Measurement
Harting Section 90 Tooling Harting Section 90 Tooling
HARTING Battery Crimp Tools HARTING Battery Crimp Tools
HARTING Pneumatic Crimp Tools HARTING Pneumatic Crimp Tools

 

 

Sturtevant Richmont 2018 Sturtevant Richmont 2018
  • BCD Electronics
  • DMC Daniels Manufacturing Corporation
  • Elpress AB
  • Harting
  • Ideal Industries
  • MEISEI Corporation
  • KITCO fiber optics
  • Sturtevant Richmont
  • TE Connectivity
Hestia | Developed by ThemeIsle
This site uses cookies: Find out more.